by Sonja Hottelmann | Nov 27, 2023 | Blog
Lamination in Tablets: A Dive into a Common Tablet Defect In any production process, errors can occur. Speaking about pharmaceutical tablet production one of these defects is known as lamination. But what exactly is lamination, and how can it be prevented? In this...
by Sonja Hottelmann | Okt 31, 2023 | Blog
„Sticking“ in Tablets: Causes and Solutions Sticking in tablet production can be very challenging and can have significant implications for the quality of a tablet. What Does „Sticking“ Mean Exactly? Sticking occurs when powder adheres to the...
by Sonja Hottelmann | Okt 27, 2023 | Blog
Capping in Tablet Production: Causes, Prevention, and Production Optimization Tablet manufacturing demands precision, expertise, and the right technology. Solids Development is here to support you in optimizing your tableting processes. A common issue encountered in...
by Maarten Lammens | Aug 18, 2021 | Blog, Glossar
Limitations of DoE During Early-Stage Development of Dry Granulation FormulationsHow to Avoid the Pitfalls of Design of Experiments in Roller CompactionBeing responsible for developing a dry granulate with a roller compactor, the formulator must face the challenge of...
by ueberflieger.media | Aug 3, 2021 | Allgemein, Blog, Glossar, Roller compaction
Press Force for Dry Granulation The Influence of Press Force and Gap on Ribbon and Granule Properties in Roller Compaction Press force and the gap between press rollers are the two main drivers in dry granulation. The applied press force is called the specific press...