by Solids Development | May 13, 2025 | Advisor #DrRob
Customer Credentials – Stability issues in tablet production Situation at first contact An international pharmaceutical company contacted us because they had stability issues with an important product. So far the produced tablet batches were still in-spec, but getting...
by Solids Development | Apr 24, 2025 | Advisor #DrRob
Customer Credentials – Direct Compression not always possible for every API Situation at first contact We were consulted by an international pharmaceutical company that wanted to transfer one of its major products to direct tableting. Until then, the product was...
by Solids Development | Apr 22, 2025 | Advisor #DrRob
Customer Credentials – Roller Compaction Trials with Oxygen-reduced Environment Situation at first contact An international pharmaceutical company contacted us because they wanted to perform some roller compaction trials to optimize one of their existing...
by Solids Development | Apr 10, 2025 | Advisor #DrRob
Customer Credentials – Combining Support in Roller Compaction Trials with Advanced Training Situation at first contact A big pharmaceutical company wanted to transfer several products to a new roller compactor at their site in India. As the experience with the...
by Solids Development | Mar 24, 2025 | Advisor #DrRob
Customer Credentials – Choosing the best punch format despite API shortage Situation at first contact An international pharmaceutical company wanted to establish a new product. During development, they observed that the formulation was very sensitive to changes...
by Solids Development | Mar 6, 2025 | Advisor #DrRob
Solving tableting problems by optimizing the granulation process Situation at first contact A global pharmaceutical company focused on semi-solid and liquid products contacted us, because one of their few solid products showed increasing OOS events. To counteract this...
